![]() ![]() After the reset ink absorber counter is reset, the counter value is printed automatically. Main ink absorber counter Set a sheet of A4 or Letter sized paper. printĬleaning of Black and Color at the same time The following printing is performed successively: - Service test print - EEPROM information print - Unified inspection pattern print Nozzle check pattern print The user nozzle check pattern is printed. EEPROM information print items: - Model name - Destination - ROM version - Ink absorber counter value (ink amount in the ink absorber) - Print information - Error information, etc. Service test print items: - Model name - ROM version - Ink absorber counter value (ink amount in the ink absorber) - USB serial number - Destination - EEPROM information - Barcode (model name + destination), etc.ĮEPROM information print The dialog box opens to select the paper source. Solution (Replacement of listed parts, which are likely to be faulty) Replace the following item: - Logic board Replace the following items: - Scanner unit - Logic board (3) Nozzle check pattern print (4) Unified inspection pattern print The procedures are the same as the base machines. ![]() Service Mode Use the Service Tool (version 1.05) on the connected computer. ![]() Other hardware P20 error Scanner motor P22 errorĢ-1. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (ON LED) Cycles of blinking in orange and green 20 times 22 times Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (ON LED) ADJUSTMENT / SETTINGS 2-1. LIST OF ERROR DISPLAY / TROUBLESHOOTING 1-2. For other information, refer to the "MP240 / MP245, MP260 / MP268, MP480 / MP486 Simplified Service Manual" (QY8-13BV-010). In this manual, only the differences from the base machines, MP240 / MP245, MP260 / MP268, and MP480 / MP486, are given. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |